Outline · [ Standard ] · Linear+ My Config with routeur, Screenshots adsl only ;-)

[guymauve]

Computer configuration:
eMule Plus version:	1d
Using proxy:	No
Firewall:	Yes
CPU:	P4 2.6C
Memory:	512 RAm
Operating System:	Xp Pro Sp2
Updated drivers for network and video:	Yes

Hello,

Since 2 years, I used to take emule + to get edk files.

Unfortunately, i changed my usb modem and replace them by a routeur

My nat, port forwarding etc are ok and emule is in high id

My problem is that my dl is null or very low ... After 15min, my emule+ dl with my usb modem. Now it takes over 2hours and i never dl ...

My sp2 is patched to 500 connections ...

Here is screenshots. Could you advise me for the settings. I read the faq and change my configuration and nothing is changing up to now.

I have a 1mbits/256 line

Session ratio : +- 110/1

Thanks a lot and sorry my english is bad.

[DonGato]

Can you add some screenshots of how you set up your NAT and Firewall settings in your router?

[guymauve]

Thanks ...

A+

[Fuxie - DK]

One problem right here...

20 and 200 in Max Connections should be exchanged

[guymauve]

Thanks but what's the 200 ??? max simultaneus connections ???

What can i change and which value can i put ???

Thanks

[Fuxie - DK]

Max Connections is number of open connections at any one time... Set that to 200, since most routers only support 256 connections and you want to leave some room for other programs..

Max Per 5 Seconds is how many connections that can be processed within 5 seconds.. Set it to 20 to avoid the line to be flooded..

[DonGato]

And set other ports. 4662 and 4672 are commonly throttled by ISPs (like 8080 and 8090). Also remember the second port is UDP, not TCP as you set in your router, so you're missing some server responses and source exchanges. No wonder you have bad download speeds.

Don't forget to change it first in the router, then the client and then restart it as port changes (in the client) only work with a restart.

Another question, you have an static IP (from local network) in your computer, don't you?

[guymauve]

Max Connections is number of open connections at any one time... Set that to 200, since most routers only support 256 connections and you want to leave some room for other programs..

Max Per 5 Seconds is how many connections that can be processed within 5 seconds.. Set it to 20 to avoid the line to be flooded..

Thanks. i read it in the faq but i thought that it was too short ... I thought that it could be a reason for my poor dl

And set other ports. 4662 and 4672 are commonly throttled by ISPs (like 8080 and 8090). Also remember the second port is UDP, not TCP as you set in your router, so you're missing some server responses and source exchanges. No wonder you have bad download speeds.

Don't forget to change it first in the router, then the client and then restart it as port changes (in the client) only work with a restart.

Another question, you have an static IP (from local network) in your computer, don't you?

ok i'll change the ports and rectify mu second port

What must ido with my static ip. I did'nt know that it had influence Sorry for my newbie's question

[DonGato]

You should have an static (local network) IP so the router rules will work always. If not DHCP, that you have enabled, will assign your computer a dynamic IP and the rules won't work for that new IP. I think you're already doing that but just was confirming.

[guymauve]

You should have an static (local network) IP so the router rules will work always. If not DHCP, that you have enabled, will assign your computer a dynamic IP and the rules won't work for that new IP. I think you're already doing that but just was confirming.

I made changes for ports. Here's the screenshot, is that correct ?? :



You see the others router's screenshots, than must i change something else ???

Thanks a lot

[guymauve]

ok it works better.

I changed somme settings.

Coud you tell me your advise about these changes :

Sources Max per files : 400

Eliminate highest Qr: enable

Max Connections: 200

in 5sec: 35

It works since 50min but is it the best settings or do you change anything else ???

Thanks a lot.

PS: I made a link from my site ( http://www.mxforum.be ) to emuleplus.tk

[DonGato]

Yes, it is ok like that.
If you link to us please link to http://emuleplus.info that is a popup free site (.tk is the old site we keep only as compatibility).

[guymauve]

If you link to us please link to http://emuleplus.info that is a popup free site (.tk is the old site we keep only as compatibility).

ok i do it

[guymauve]

Coud you tell me your advise about these changes :

Sources Max per files  : 300

Eliminate highest Qr: enable

Max Connections: 200

in 5sec: 25

My connection stop after 50min. I can surf anymore (error 404)

Which setting cause this trouble ???

Thanks a lot

[muleteer]

Do you have a router? Most budget routers have an internal limit of 256 connections.