Outline · [ Standard ] · Linear+ Uneven uploads

[dan99]

My issue is with uploads, instead of an even spread to all uploads the guy on the top of the list gets almost all upload speed while the rest sit at 0.1 - 0.5k..

in the FAQ

"If you have too many 0.x upload slots with the zz upload system try to reduce the upload limit a bit and wait 30 minutes until it stabilizes. Reaching your maximum bandwidth isn't any good for the way the system calculates the needed slots, so please make your limit lower than the line maximum."

I started uploading at 80k.. and did as the FAQ stated and started to drop it every 30 mins when I didn't see a change.. now I'm down to 11k.. and the problem still exists.. any thoughts?

[reanimated838uk]

Its like that. That part of the FAQ is referring to when you only have 0.x speeds. Search for the FAQ on ZZ Upload system.

Theres nothing wrong with the uploads.

[moosetea]

Its by design, its the zz system.

By uploading as fast as possible to as many people as posible parts will spread across the network faster and everyone benifits, the slow users are trickle slots and will be moved into the top spots when the main slots have been given an entire part.

The reduction in the FAQ should be done if your uploading too much and you have lots and lots of little slots, a small number of little (trickle) slots is by design

[reanimated838uk]

another case of bizarrity...
14:44pm post after a 14:47 one....hmm...

[moosetea]

@reanimated838uk : perhaps its has something to do with internet speed, Im on a very nippy line at work. ie you posted first but my machine finished talking to the webserver first.